Free Delivery in Europe
Leyland Trade Pliolite Based Masonry Magnolia 5L
SKU
10020016
Out of stock

Leyland Trade Pliolite Based Masonry Magnolia 5L

SKU
10020016
Out of stock
Leyland Trade Pliolite Based Masonry Magnolia 5L
Specifications
Volume5L
ColourMagnolia
FinishMatt
Description

Truguard Pliolite

Based Masonry Specially formulated on durable Pliolite® Resin, providing excellent adhesion to the substrate, eliminating the need for a separate stabilising primer and providing resistance to rain within 20 minutes of application. The smooth, durable, matt finish can be applied in temperatures as low as -5°C, enabling year-round application.

Technical Data

Recommended uses

 Exterior

Type of substrate

 Concrete, cement, rendering, brick, stone, blockwork and pebble dash.

Finish

Matt

Volume solid

49%

Coverage

1 litre will cover approximately 8 square metres on smooth surfaces. In common with all wall paints, the spreading rate will be reduced on rough and absorbent surfaces such as pebble dash. When using more than one tin of a colour, it is advised that you intermix the quantity required beforehand.  

Drying time

Recoatable after 24 hours.

Transportation and storage

 To avoid the risk of spillage, always store and transport in a secure upright position. Store away from heat and flame.

Film thickness

Wet: 125µm Dry: 61µm

Preparation

Ensure surface to be painted is sound, clean, dry and free from grease. Treat any mould or lichen with Sterilisation Wash as directed. Chalky, underbound surfaces should be scraped, dry brushed and sealed with Leyland Truguard Stabilising Masonry Primer. Wear a suitable face mask if creating dust.

Application

Stir well before use. Do not thin. Apply two coats, allowing 16-24 hours between coats under normal conditions. Do not apply to surfaces which are to be overcoated with conventional undercoat and gloss paint. Suitable for application by brush, roller, conventional or airless spray.

Cleaning

Remove as much product as possible from application equipment before cleaning. Clean equipment immediately after use with white spirit. Some local authorities have special facilities for disposal of waste coatings. Do not empty product into drains or watercourses.

 Warning

  Keep out of reach of children.

  Avoid contact with skin and eyes.

  Do not ingest.

   Do not breathe spray.  Wear respiratory protection.

    If medical advice is needed have container or label to hand.

 

Reviews
Add Review
Add Review