Free Delivery in Europe
Leyland Trade Non-Drip Gloss Brilliant White 2.5L
SKU
10030050
Out of stock

Leyland Trade Non-Drip Gloss Brilliant White 2.5L

SKU
10030050
Out of stock
Leyland Trade Non-Drip Gloss Brilliant White 2.5L
Specifications
ColourBrilliant White
FinishHigh Gloss
Volume2.50
Description

Non Drip Gloss

An easy-to-use hardwearing, gloss finish which requires no undercoat. Ideal for use on interior and exterior wood and metalwork.

Recommended uses

Interior, Exterior

Type of substrate

Wood and metal.

Finish

High Gloss

Volume solid

61%

Coverage

1 litre will cover approximately 14 square metres, depending on the nature and porosity of the surface. Strong or contrasting colours may require additional coats.

Drying time

Touch dry in 2-4 hours. Recoatable after 16-24 hours.

Transportation and storage

To avoid the risk of spillage, always store and transport in a secure upright position.

Store away from heat and flame.

Film thickness

Wet: 70µm

Dry: 43µm

Preparation

Ensure surface to be painted is sound, clean, dry and free from grease. Remove all loose and defective paint. Prime all new and bare surfaces with the appropriate Leyland Primer. Rub down sound previously painted surfaces with fine waterproof abrasive paper to provide a key. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.

Application

Do not stir. The brush should be fully loaded for best results. Occasionally, a small amount of liquid may appear in the tin, if this is not used in the first brushful, remove excess. Apply paintevenly by brush and avoid overspreading. Allow to dry overnight before applying a second coat if required. Do not apply over polystyrene surfaces.

Cleaning

Remove as much product as possible from application equipment before cleaning. Clean equipment immediately after use with White Spirit or Turpentine Substitute. Some local authorities have special facilities for disposal of waste coatings. Do not empty product into drains or watercourses. Replace lid firmly after use.

Warning

• Keep out of reach of children.

• Avoid contact with skin and eyes.

• Do not ingest.

• If medical advice is needed have container

or label to hand

 

Reviews
Add Review
Add Review