Leyland Trade MDF Primer White 750ml

MDF Primer

Specifically formulated for use on interior and exterior medium density fibre board. It offers a low odour alternative to traditional solvent based primers producing an ideal surface for over coating with a subsequent top coat and its quick drying properties enable two or three coats to be applied in  just one day.

Technical Data

Recommended uses 

Type of substrate Interior and exterior medium density fibre board.

Finish

Matt

Volume solid

36%

Coverage

1 litre will cover approximately 13 square metres per litre, depending on the nature and porosity of the surface.

Drying time

Touch dry in 30 minutes Recoat in 1-2 hours

Transportation and storage

PROTECT FROM FROST.

To avoid the risk of spillage, always store and transport in a secure upright position. Lift with care - gross weight does not exceed  4 kilograms. (2.5L).

Film thickness

Wet: 77 micron Dry: 27 micron

Preparation

Ensure that the surface to be painted is clean, dry and free from loose and flaking material. Nail heads should be treated with Leyland AntiCorrosive Metal Primer. Rub down previously painted surfaces with fine waterproof abrasive paper to provide a key and rinse thoroughly. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Special precautions should be taken during preparation of  pre-1960s paint surfaces over wood and metal as they may contain harmful lead.

Application

Stir well before use. Apply by a brush or roller which should be clean and free from solvent and oil. Apply liberally, brushing firmly into the surface. Do not apply when the air or surface temperature is below 10ºC or externally when rain is imminent. A second coat serves as an excellent undercoat for gloss finishes. Under normal conditions, touch dry in 30 minutes, recoatable after 1-2 hours. High humidity can retard the drying time.

Cleaning

Remove as much product as possible from application equipment before cleaning. Clean equipment immediately after use in warm soapy water and rinse thoroughly. Replace lid firmly. Some local authorities have special facilities for the disposal of waste coatings. Do not empty product into drains or watercourses.

Warning

•  Keep out of reach of children.

•  Avoid contact with skin and eyes.

•  Do not ingest.

•   If medical advice is needed have container or label to hand.