Leyland Trade Heavy Duty Floor Paint Empire Green 5L
Colour | Empire Green |
---|---|
Finish | Mid Sheen |
Volume | 5L |
Heavy Duty Floor Paint
A hard wearing, protective, satin finish. Based on polyurethane alkyd resins which have been designed to withstand spillage and repeated cleaning. Ideal for use on most concrete and wooden floor areas such as garages, warehouses, workshops and factories, where the application of two coats provide excellent durability.
Technical Data
Recommended uses
Interior
Type of substrate
Concrete, and wooden floors.
Finish
Mid-sheen
Volume solid
57%
Coverage
1 litre will cover approximately 11 square metres, depending on the nature and porosity of the surface. When using more than one tin of a colour in the same area, intermix before use.
Drying time
Under normal conditions, touch dry in 2-4 hours. Recoatable after 16-24 hours..
Film thickness
Wet: 91µm Dry: 52µm
Transportation and storage
To avoid the risk of spillage, always store and transport in a secure upright position. Store away from heat and flame.
Preparation
Ensure all floor surfaces to be painted are sound, clean, dry and completely free from oil,grease and polish. New concrete floors should preferably be allowed to mature for several months before painting and the moisture content should be checked before work commences. Concrete surfaces should also be free of dust, grit, cement fines and laitance. Very dense smooth concrete surfaces (such as power floated concrete) normally require to be acid etched before painting in order to promote satisfactory adhesion.
Application
Stir well before use. Apply two coats, allowing overnight drying between coats under normal drying conditions. Where necessary, to ease application, the first coat may be thinned with up to 5% by volume of White Spirit. Apply by brush or roller.
Cleaning
Remove as much product as possible from application equipment before cleaning. Clean equipment immediately after use with White Spirit or Turpentine Substitute. Some local authorities have special facilities for disposal of waste coatings. Do not empty product into drains or watercourses. Replace lid firmly.
Warning
• Keep out of reach of children.
• Avoid contact with skin and eyes.
• Do not ingest.
• Do not breathe spray. Wear respiratory protection.
• If medical advice is needed have container or label to hand.