Hanson Multipurpose Concrete

DESCRIPTION

Hanson Multipurpose Concrete is prepared by blending Hanson Cement CEM I 52.5N (to BS EN

197), with Regen GGBS (to BS EN 15167) and aggregates (0/4mm sand and 4/10mm coarse

aggregate, conforming to BS EN 12620).

 

APPLICATION

Hanson Multipurpose Concrete can be used for paths, drives, foundations and general concrete work.

• Easy to use – just add water

• Saves time – quick and convenient

• Quality – guaranteed product quality

 

INSTRUCTION FOR USE

All surfaces to be worked should be free from oil, grease and any loose material. The area where

concrete is to be placed should be prepared to prevent loss of moisture from the wet concrete.

For best results, mix thoroughly using a mechanical mixer, empty the bag of Hanson Multipurpose

Concrete into the mixer and blend until uniform. Slowly add clean water until the desired consistency

or slump characteristics are achieved.

Alternatively, empty the bag of Hanson Multipurpose Concrete onto a clean, flat moisture resistant

surface, such as a mortar tray. Slowly add clean water until the desired consistency or slump

characteristics are achieved, by thoroughly mixing with the aid of a shovel or similar.

Please note: The contents of the bag may segregate during transport and handling. To ensure

satisfactory performance, the entire contents of the bag should be mixed thoroughly. If only part of

the bag is required at a time mix together the entire contents on a clean, dry surface. Return surplus

to the bag or other suitable container.

Avoid adding too much water whilst mixing as this will weaken, affect the setting time, and affect the

durability of the concrete mix.

For best results, use the concrete within 30 minutes of mixing with water. Protect newly laid concrete

from the weather until fully hardened. Concrete strengths are improved by keeping the concrete damp

during hardening.

Application temperature: +5ºC to +35ºC.

 

PACKAGING AND STORAGE

• This product must be stored in unopened bags clear of the ground in cool dry conditions

and protected from excessive draught.

• If stored correctly, as detailed above, the chromium (VI) in this product will be within

required levels for up to 12 months from the date shown on the bag.

• Use of this product after the declared storage period, as detailed above, may increase

the risk of an allergic reaction following direct contact with skin.

• Concrete MaxiPack20 comes in an easy to handle, fully waterproof all weather bag.