Cromar GRP C4 Internal Fillet Corner

GRP pre-formed internal corner for use with A200 and B260 trims to form a right or left hand corner

It is essential the installer follows the following steps and has the products required for installation of the glassfibre roofing system:

1. Preparation and Laying the deck. OSB T & G boards are recommended.
2. Trim installation. Drip edge trim, centre drip, upstand trim, angle fillet trim, lead flashing and additional angles, corners, trims, closures & fixings also available.
3. Application of PRO GRP system. PRO GRP Resin, PRO GRP chopped strand matting, rollers, mixing buckets, Catalyst & brushes.
4. Application of Topcoat. PRO GRP Topcoat, Acetone & flashing trim.

For further information please refer to The Cromar PRO GRP installation guide.

Cromar will give a 25 year manufacturer’s warranty when installed by an approved PRO GRP installer.